How to hang eucalyptus in shower?

Hang eucalyptus in shower: Adding a touch of eucalyptus to your shower can help you feel fresh and relax after a long day. Here’s how to do it!

What You’ll Need

To hang eucalyptus in your shower, you’ll need: 

• A branch of eucalyptus
• A drill
• 1¼ inch hole saw
• Sturdy String or Twine
• Hammer or Nail Gun
• Hinges
• Screws or Nails (optional)

Step One: Cut the Branch off the Eucalyptus Tree

• If you’re using a live eucalyptus tree, be sure to remove any branches that are too close to the trunk so you don’t damage the tree. If you’re using a pre-cut branch, simply cut it off at a length equal to or slightly longer than the distance between your shower head and the wall. 
• If you’re using a pre-cut branch, make sure to check the manufacturer’s instructions for hanging your tree. Most require that a screw be inserted into one of the notches on the side of the branch, which will hold it in place while showering. 
• If you’re using a live eucalyptus tree, be sure to remove any branches that are too close to the trunk so you don’t damage the tree.

Step Two: Drill a Hole in the Wall

• Use a 1¼ inch hole saw to make a hole in your shower wall at a height that’s comfortable for you. Be sure to use a level when drilling the hole, so it’s straight and the shower head hangs level. If you’re using screws or nails, make sure to insert them into the wall before hanging your eucalyptus tree.
• If you’re using screws or nails, make sure to insert them into the wall before hanging your eucalyptus tree.

Step Three: String or Twine the Eucalyptus Branch through the Hole in the Wall

• Thread one end of sturdy string or twine through both holes in the branch and wall, making sure the knot is tight. Repeat this process for each end of the branch.
• Thread one end of sturdy string or twine through both holes in the branch and wall, making sure the knot is tight. Repeat this process for each end of the branch.

How to Hang Eucalyptus in Your Shower

If you’re looking for an aromatic way to freshen up your shower, an eucalyptus tree may be the perfect solution. Eucalyptus trees are native to Australia, but they can also be found in other parts of the world. If you have a small space, an eucalyptus tree can be easily suspended from the shower head with a few simple supplies. Here are instructions on how to hang an eucalyptus in your shower:

1. Find a suitable eucalyptus tree. Avoid trees that are wilted or dry, as they will not work well in a shower.
2. Make sure the tree is sturdy enough to support its own weight. If necessary, adjust the branch tips so that they are within reach of the shower head.
3. Cut the tree down to approximately 4 inches in height and remove any loose branches.
4. Cut two pieces of wire about 18 inches long each and carefully bend one end into a “U” shape. Make sure that the wire is long enough to extend beyond both ends of the U-shaped bend.
5. Place one end of the wire into the U-shaped bend and hold it in place with pliers.
6. Bend the other end of the wire around the tree trunk, making sure that the wire extends beyond both ends of the U-shaped bend.
7. Twist the ends of the wire together to form a tight loop.
8. Repeat steps 5-7 on the other side of the tree.
9. Hang the eucalyptus tree by inserting one end of the wire into one of the bottom holes on the shower head and threading it through the top hole. Hold on to the wire loop, and gently pull up on the branch until it is tight against the shower head.
10. Repeat steps 3-10 for each eucalyptus branch in your shower!

Image Source – Pinterest

Tips for Freshness

When it comes to eucalyptus, the key is to make sure the plant stays fresh. 

• Keep eucalyptus in a cool, dark place.
• Avoid direct sunlight or strong breezes.
• Avoid leaving eucalyptus in water that has been left sitting for too long.

Maintenance

Since eucalyptus trees are such maintenance-heavy plants, it’s important to know how to hang them in a shower so they don’t get water spots on the tile or walls. When you buy a eucalyptus tree, ask the nursery whether it comes with a pre-determined hanger or if you will need to purchase one separately. Generally, eucalyptus trees need an “A” hanger, which is an inch shorter than a “B” hanger. Here are instructions on how to hang an eucalyptus using either type of hanger:

1. Remove the plant from its pot by grabbing the roots and pulling up. If the pot has drainage holes, remove them before removing the plant.
2. Use your hands to loosen any soil that may be clinging to the roots.
3. Place the plant in a hanging position by placing it over a sturdy post or railing, then use your hands to press down on the top of the tree so that it is secure. Make sure that there are no branches extending below the post or railing.
4. Hang the tree by insertingthe “A” hanger into one of the plant’s holes near the top, then pulling up on the hanger. Make sure that the hanger is tight against the post or railing. Repeat for the other hole.
5. If you are using a pre-determined hanger, simply poke it through one of the holes in the post or railing, then pull it tight.

Materials

Eucalyptus is a popular plant to use in showers because of its strong odor and its ability to cleanse the air. There are a few ways to hang eucalyptus in a shower, but the easiest way is to use an Eucalyptus tree hanger. It is also possible to purchase pre-made shower eucalyptus holders from online retailers.

How to Hang Eucalyptus?

If you love the refreshing scent of eucalyptus, but don’t want to deal with the hassle of traveling with an entire jar, you can easily hang a small piece of eucalyptus in your shower. Just be sure to remove the leaves when they start to dry out, or they may start to emit an unpleasant smell.

To hang eucalyptus in your shower, first cut a small branch off the tree and strip away any dried leaves. Cut a long piece of string or twine and tie one end around the branch at a height that’s comfortable for you (you may want to hold onto the other end while you do this). Then, tie the other end of the string around a sturdy fixture in your shower (like a pipe or towel bar). The eucalyptus will now hang from the string and provide you with a refreshing aroma every time you take a shower.

Tips for Care and Maintenance

If you love the fresh, floral smell of eucalyptus, you’ll love using it in your shower. Here are some tips for caring for and maintaining your eucalyptus tree:

• Store your eucalyptus away from direct sunlight or heat – both can damage the tree’s leaves and bark.
• Remove any dead leaves and branches from the tree – these will add moisture to the air and make the tree less effective at removing bad smells.
• Check the tree’s water supply – if it’s low, top up the container with fresh water.
• Clean the shower enclosure around the eucalyptus – mineral build-up can cause discoloration and poor air circulation.